Specification Guide
Narrow vs Extended Lace Fronts on Sheitels: Coverage Width
What does a sheitel lace front width figure actually describe? Across the Jewish-wig listings checked for this guide, it describes different things. One maker attaches a small inch figure — a half inch, one inch — to the front band without saying what the inch measures. Others publish “ear to ear” wording — and where the basis is stated at all, two sellers state different routes: one measures ear to ear along the hairline, another labels an “ear to ear over top” figure taken over the crown.
One boundary frames the whole guide: those printed routes are whole-cap fit measurements, and none of the pages checked defines the width of the lace material itself. This guide separates the routes, reads the published figures as written, and lists the fields to confirm in writing before an order. Whether a front should carry lace in the first place is a separate buying decision this guide does not take up.
Measuring Routes
Ear-to-Ear and Front Figures: Different Measuring Routes
The same “ear to ear” words print with at least two different stated bases in the opened set. Silk or Lace defines the measurement on its Sayar R3330 listing: “Ear to ear ( measured from top of each ear area across hairline) : 12”” — a route taken along the hairline, from the top of each ear area across the front. Superhairpieces’ Sarah listing prints “Ear to ear over top: 13”” — the phrase measured over the crown instead.
Maker education documents the same split: Jon Renau’s cap-design guide measures its stock ear-to-ear by establishing a “top of head point” seven inches back from the front hairline and measuring across it, ear hairline to ear hairline — a cap-fit route over the top (observed 2026-10-29). Same term, different stated routes, and neither converts into the other without the seller’s basis.
Keep one boundary in view while reading those figures: they are whole-cap fit measurements. The pages checked publish no separate statement of how wide the lace material of the front itself is, so a 12-inch or 13-inch ear-to-ear figure is evidence about measuring practice, not about lace coverage.
Figures With No Stated Route
Other figures in the opened set come with no route at all. Factory Wigs' Jewish Kosher Wig states its structure as “Real Swiss lace top & ear to ear, with elastic net back” — a direction named in words, with no inch figure printed in the spec text and no measuring definition. ReHair System attaches inch figures directly to the front band — “Mono top with 1/2" French Lace front” and “New Injection Lace with 1" French Lace front&temples” — but neither page states whether its inch runs back from the hairline or describes anything else, so the direction stays an open question, not an established depth.
The practical point for a buyer: an inch figure from one seller and an ear-to-ear phrase from another are not outputs of one scale — and two pages using the same “ear to ear” words can be measuring different routes.

The Published Figures
Half-Inch and One-Inch Front Designs
The figures below are quoted as the listings state them, each seller named. Two come from ReHair System, whose titles say “Jewish Wig” — the words Kosher and Sheitel do not appear on either page. The third comes from Factory Wigs, whose title says “Jewish Kosher Wig” and whose page does not use the word sheitel.
| Listing | Front wording as listed | Inch figure |
|---|---|---|
| ReHair System, mono top Jewish wig (14.5-inch model) | “Mono top with 1/2" French Lace front, Wefted sides&back” | 1/2 inch |
| ReHair System, injection lace Jewish wig | “New Injection Lace with 1" French Lace front&temples, Wefted sides&back” | 1 inch, plus temples |
| Factory Wigs, Jewish Kosher Wig (lace top) | “Real Swiss lace top & ear to ear, with elastic net back.” | None stated |
Three Observations from the Table
Three observations sit in that table. First, one maker uses two different front figures: ReHair System's mono top states a 1/2" French Lace front, while its injection lace listing — a page filed at a medical-wig address, cited here for its specification text alone — states a 1" French Lace front together with temples. The figure is product-specific, and neither page explains what its inch measures. Second, Factory Wigs gives a direction without a distance: ear-to-ear coverage, no inch figure. Third, both ReHair pages name the zones behind the front — “Wefted sides&back” — so a listing can state what sits behind the front.
What the table does not do is rank these fronts. Depth, span, and temple reach are different dimensions, and a listing that publishes one of them has disclosed part of a specification, not a complete one.
Temple Reach
Temple Coverage and Hairline Appearance
Front coverage does not necessarily stop at the hairline. ReHair System's injection lace listing states “1" French Lace front&temples” — the front band and the temple area named in one field — while its mono-top listing states a front with no temple wording. Factory Wigs' ear-to-ear phrasing describes a front spanning the hairline; the page adds no separate temple statement.
For a boutique, the listing words raise two questions: does the lace front stop at the hairline, or continue into the temple area — and where it continues, how far around does it reach? Temple treatment appears on one ReHair page and not the other from the same maker, so the field is a line to confirm per product, not something to infer from a catalogue.
How hair attaches to the lace — knotted, injected, or another method — is a ventilation question this guide does not take up. The dimension here is reach, not attachment.
Measuring Basis
Measuring Lace Coverage Correctly
The gap this guide keeps returning to has two halves. Two of the opened sellers state their bases in print — Silk or Lace with its parenthetical definitions, Superhairpieces with its “over top” label — and those bases differ from each other. The remaining pages checked print figures without a measuring basis: Factory Wigs names ear-to-ear without inches or endpoints, and ReHair System gives inch figures without stating what the inch measures.
The Silk or Lace page also shows how much one definition sentence settles. Besides its parting area (“measured center cross section of area, side to side x front to back”), the same listing defines its cap measurements: ear to ear “from top of each ear area across hairline” (12 in.) and “Front to back (measured from start of front center hairline to nape)” (13.5"). The page carries no Jewish, Kosher, or Sheitel wording, so it is cited as evidence about disclosure practice, not as a sheitel-market example. Its definitions are not interchangeable with a bare inch figure or an over-the-top label on another seller's page.
Measuring bases exist, they differ between sellers, and some figures ship with none. That is the reason to ask for the basis behind any figure you are quoted.
The Specification Routine
Choosing a Front Configuration for Retail Clients
This guide does not rank front configurations or set a coverage target for any client; hairline goals belong to the boutique and its clients. What the checked listings support is a specification routine — ask the supplier to state each field below in writing:
| Field to confirm | What a specific answer looks like |
|---|---|
| Measuring basis | Whether the front figure is depth from the hairline, lateral span, or both — in the seller's own words |
| Cap diagram | An annotated image showing the lace area, on the model of the Factory Wigs structure photo |
| Temple coverage | Whether the lace front stops at the hairline or continues into the temples |
| Lace type with the figure | Type and dimension in one line — “1" French Lace front” — so neither is inferred from the other |
| Zones behind the front | Sides and back named explicitly, as both ReHair pages do |

What the Routine Does Not Cover
Two boundaries close the routine. This page assumes the lace decision is made: choosing between a lace front and a lace top is its own comparison — the front-versus-top guide and the lace top complete guide cover it — and the checks around a wholesale purchase have their own lace front buyer's guide. The cap-wide question — which zones carry lace, front, crown, or whole cap — and the ventilation question belong to separate discussions. The field here is narrower: the width and depth inside an existing front.
On the listings checked, it is the seller's front-band figure: ReHair System's mono-top page states “1/2" French Lace front” with wefted sides and back, under a “Jewish Wig” title with no Kosher or Sheitel wording on the page. The page does not define how the half inch is measured or which direction it runs, so confirm the basis in writing before treating it as a depth or a span.
Not on the evidence opened. The printed ear-to-ear figures are whole-cap fit measurements, not lace-material widths: Silk or Lace defines “Ear to ear” as “measured from top of each ear area across hairline” (12 in. on its Sayar R3330 listing), Superhairpieces labels “Ear to ear over top: 13””, and Jon Renau’s cap guide likewise measures ear to ear over a top-of-head point for cap fit. Same term, different routes — and neither kind of figure states how wide the lace material of the front itself is. Treat the phrase as a question per seller: what does it measure, from where to where, on this exact cap?
The opened pages state whole-cap fit routes, not lace widths. Silk or Lace prints cap-fit definitions — ear to ear “measured from top of each ear area across hairline” and “Front to back (measured from start of front center hairline to nape)” — and Jon Renau’s cap-design guide documents the over-the-top route for its own sizing. Those routes show the terms are ambiguous, but none of them defines the width of the lace material itself. The ReHair and Factory Wigs pages checked publish front figures without any stated basis. So ask a supplier to state, in its own words, what a front figure measures — a front-band depth, a lace span, or something else — before it goes on an order.
This guide sets no coverage target; hairline goals belong to the client and the boutique. The specification step is the same for any figure: confirm whether it describes depth or span, request a cap diagram showing the lace area, and confirm in writing whether the front includes temple coverage.
Conclusion
Ask for the Basis, Not Just the Number
A front figure is a useful starting point and an incomplete specification. The listings checked for this guide quote a half-inch French lace front, a one-inch front with temples, and ear-to-ear Swiss lace — on bases that are stated (as whole-cap fit routes along the hairline or over the top), stated differently, or missing entirely, and none of the pages defines the lace material’s own width. The routine above turns any of those figures into something an order can be checked against: the measuring basis, the cap diagram, the temple answer, and the zones behind the front. Bring those fields to the supplier with the sample request, not after the sample arrives.
Ordering a Sheitel Front to a Written Width?
Use the confirmation fields above to record the measuring basis, the cap diagram, and the temple answer before a front is approved.
Contact LEV Wigs