Wholesale Wig Cap Fit Sample Set: A Guide for Boutiques
A wholesale wig cap fit sample set lets your boutique assess the sizes it plans to stock on the customers it serves. Start with the supplier’s chart, then check labeled samples under the same wearing conditions you expect in the shop.
Quick answer: Request one labeled wig cap sample for each size tier you plan to stock. Record sliding, pressure, gaps and strap settings during each try-on. Use the fit sample set template and try-on record to confirm the cap dimensions and tolerances in writing before ordering in bulk.
Two customers with the same head circumference can still get different results from the same cap. This guide helps wig boutiques, distributors and brands record those differences and turn them into buying decisions. If you still need the head measurements, start with the custom sheitel measurements guide.
Check the Size Chart for the Exact Cap
Size names such as petite, average and large need the measurements behind them. Hairalicious’ sizing guide explains why labels can be misleading and lists circumference and front-to-nape measurements for its own products.
Ask for the chart for the exact model or construction you plan to buy. Check how the supplier measures each dimension, whether the quoted number is relaxed or stretched, and what tolerance applies to production. Then use a sample to see how those dimensions work together on a wearer.
Head Numbers vs Cap Numbers
Keep the wearer’s measurements separate from the supplier’s cap dimensions. Each record needs its own start and end points.
- Head side — what you measure on the person. The two primary numbers are head circumference and front-to-nape length. How to take them, and the other points worth recording, are covered step by step in the measurements guide.
- Cap dimensions. Ask how the supplier defines circumference and cap depth or front-to-back length. Record its measurement method, relaxed or stretched state, range and permitted tolerance for each size.
Use the chart for the model you plan to buy. The Hairalicious sizing guide shows how one retailer lists circumference and front-to-nape separately. Ask your own supplier for both measurements and their tolerances for each tier you plan to stock.
Stretch depends on the construction. As a specific example, Jon Renau’s Carrie Hand Tied has a stretch section described as extending front to back and ear to ear. Ask which areas stretch on the cap you are sampling and which dimensions its straps affect. If the hairline or nape shifts, check front-to-nape fit separately and retest with the same person.
Over Existing Hair vs on a Bare Scalp
Hair preparation and underlayers are part of a useful fit record. Hairalicious advises considering how the hair is arranged when measuring for a wig. Record the preparation used for each try-on.
Include the wearing conditions relevant to the customers you serve.
- Over hair — worn with the customer’s own hair braided or flattened underneath.
- On a bare scalp — worn directly, the way customers with little or no hair of their own will wear it.
Record any liner or grip as well as hair preparation. Confirm which wearing condition each fitting result applies to.
What to Log About Fixation During a Try-On
Ask the tester to sit, turn and move as they normally would during a short fitting. Record where the cap sits at the front, sides and nape. The cap construction guide explains the components you may need to identify.
- Sliding — does the cap shift during normal movement, or stay put?
- Pressure points. Record the location and when discomfort starts. Stop or adjust the fitting if the tester reports pain.
- Gaps — visible space at the ear tabs or nape when the cap sits correctly at the front?
- Strap setting. Record the row or position used and the adjustment remaining. A tightest setting alone does not identify the cause of a fit issue.
Keep the observations specific. A note such as “front stays in place, gap at left ear tab after turning” gives the supplier a location to check.
The Fit Sample Set: What to Put In It
Choose samples around the size range and wearing conditions you expect to serve. Use the supplier’s actual tier names and identify the model or construction on every sample. Copy the following template into your buying notes.
| Sample ID | Cap size tier | Cap depth (if offered) | Base and fixation | Wear scenario | Purpose |
|---|---|---|---|---|---|
| (e.g., FS-01) | (supplier’s tier label) | (tier / value, or n/a) | (as offered) | over hair / bare scalp | baseline fit check |
| same tier, opposite wear state | |||||
| adjacent tier, same wear state | |||||
| largest tier you would stock |
Keep the set focused on the buying decisions you need to make.
- Label every sample with an ID you can reference in writing — the sample becomes the shared object between you and the supplier.
- Cover both wear states for at least one tier if you serve both customer groups.
- Add a sample when it answers a question. Identify the unresolved size, construction or wearing condition before requesting another cap.
The Single Try-On Record
Copy this record for each sample, tester and session. Record the duration and movements used so a later retest can follow the same conditions.
| Field | What to record |
|---|---|
| Sample ID / tier | The labeled cap from your set |
| Tester’s head numbers | Circumference and front-to-nape (from the six-point protocol) |
| Wear state | Over hair, or bare scalp — and how hair was prepared |
| Fixation log | Sliding / pressure / gaps / strap row used |
| Fit findings | Position at the hairline, ear tabs, top and nape; session duration and movements used |
| Verdict | pass / adjust / re-test — and one sentence why |
When the Same Circumference Needs a Different Cap
A cap can match the circumference chart yet sit incorrectly elsewhere. Check front-to-nape fit, cap shape, stretch, positioning and hair preparation before assigning a cause. A short fitting is an initial check. Discuss a suitable longer wear assessment when the intended use calls for it.
- Define the change. Ask the supplier which sample or adjustment would help investigate the observed gap or pressure.
- Keep conditions comparable. Use the same tester, preparation and fixation where possible. Note every specification that differs between the samples.
- Record the result. State where the second sample sits differently. If several specifications differ, record all of them and ask the supplier which change to investigate next.
Send both sample IDs and records with an adjustment request. If a record is incomplete, repeat the fitting before deciding which size to order.
Confirming Sizes with the Manufacturer in Writing
Send the supplier the tiers you intend to stock, sample IDs, wearer measurements and fit findings. Ask for confirmation of the dimensions and sample reference to be used for production.
You send:
- The tiers you intend to stock, named exactly as the supplier labels them
- Tester head numbers per tier from your records (circumference and front-to-nape)
- The wear state each confirmation covers
- The sample ID each conclusion came from
You ask them to confirm in writing:
- How their cap depth is measured, and the value or range per tier
- What tolerance applies to each cap dimension
- Whether fixation configurations differ per tier, and which one your samples carried
- The accepted sample reference, dimensions and checks agreed for the production order
Record any exception, such as an adjustment present on the accepted sample. Keep this specification with the order for later batch comparisons.
Human Hair Wig Cap Sizes: Common Questions
Ask for circumference and front-to-nape or cap-depth measurements for each size tier. Confirm the start and end points, whether the cap is measured relaxed or stretched, and the tolerances that apply to the order.
Assess labeled samples from the supplier's size range, using a separate record for each try-on. Send the measurements and observations to the supplier, resolve fit concerns, and identify the accepted sample and dimensions in the order specification.
Check front-to-nape fit, hair preparation, positioning and the cap's stretch and adjustment features. Record where each cap sits at the hairline, ear tabs and nape. Compare a suitable alternative sample and note every condition that changed.
Include both conditions if your customers use both. Record hair preparation, liners and grips for each fitting. Confirm which wearing condition each accepted sample and size specification covers.
Use the Findings to Select Your Stock Sizes
Select the size range after reviewing the try-on records. Flag any unresolved fit issue and ask for a revised sample or another fitting before committing to that tier. Retain the labeled samples and accepted specifications for future orders.
Discuss Your Fit Sample Requirements
Include your intended size range, wearing conditions and existing measurements with your inquiry. Flag the dimensions and adjustment features you need confirmed.
Contact LEV Wigs